レシピ

レシピ

ほっ♡と一息

ティーポットネックレス Tea Pot Necklace

寒い季節あたたかい飲み物でほっこり^^
おいしい紅茶がでてきそうなまぁるいポットはボールをアレンジして
取っ手や湯口をつけるだけで変身♪
ポットのなかもキラキラおこのみの色で飲み物を表現できます

【材料】
①UV-LEDレジン 3g
②チェコビーズ オレンジ 3mm×30~40個
③ラメ 少量
④ガラスドーム 1.8mm×1個
⑤ツイスト丸カン 8mm×1個
⑥丸カン 1個
⑦Cカン 2個
⑧チェーン 60cm×1本
⑨カニカン 1個
⑩Tピン 1本
⑪ベビーオイル 適量

【MATERIALS】
①UV-LED resin: 3g
②Czech glass beads: 3mm×30〜40pcs (Orange)
③Glitter powder sequins
④Glass dorm: 1.8mm×1
⑤Twisted jumpring: 8mm×1
⑥Jumpring: 1
⑦Oval jumpring: 2
⑧Chain: 60cm×1
⑨Lobster Clasp: 1
⑩Head pin: 1
⑪Baby oil

【道具】
①UV-LEDライト
②調色スティック
③シリコンマット
④マスキングテープ
⑤クリアファイル
⑥ストロー
⑦はさみ
⑧カッター
⑨定規
⑩スポイト
⑪指カン
⑫ピンセット
⑬平ペンチ
⑭丸ヤットコ
⑮棒ヤスリ
⑯ピンセット
⑰マジックペン
⑱型紙(取っ手、注ぎ口、ポット底:直径1cm)

【TOOLS】
①UV-LED light
②Mixsing stick
③Silicon mat
④Masking tape
⑤Clear file
⑥Straw
⑦Sissors
⑧X-Act knife
⑨Ruler
⑩Syringe
⑪Jumprong tool
⑫Tweezers
⑬Flatnose plier
⑭Corn plier
⑮File
⑯Marker
⑰Pattern paper(handle, spout, pot bottom)

【注意】
◎レジンを使用する際は手袋、マスクなどを着用して下さい
◎レジンを使用する際は風通しの良い、換気のできる場所で作業をして下さい
◎レジンは必ず固まってから取り出してください
◎レジンが肌についた際はすぐによく洗い流してください
◎オイルをボールに入れる際はボールの穴付近にオイルがつかないようご注意ください
◎取っ手と注ぎ口をコーティングする際、厚めに塗ってヤスリをかけると立体感が出ます
◎取っ手と注ぎ口を取り付ける際、ガラスドームの側面に合うようにヤスリで形を調節して下さい

取っ手と注ぎ口の型紙をクリアファイルに写す。(2ピース作る。)

Draw the handle and the spout on a clear file. (draw two of them)

ハサミでカットする。

Cut them out.

カット後、線が気になる場合はアルコールで拭く。

Clean the marker with an alcohol.

マスキングテープの粘着面を表にして丸め平らにし、カットしたパーツを置く。

Put a masking tape, sticky side up, on a silicone mat, and place cut parts on top.

それぞれにクリアレジンを乗せる。

Pour some clear resin on

照射

Cure.

固まったらクリアファイルから剥がす。

Peel the clear file off.

ファイルを裏返してマスキングテープに貼る。

Flip the clear file and put them back on the silicone mat.

クリアファイルにレジンを塗る。

Put resin on the clear files.

照射

Cure.

クリアファイルを剥がし、レジンを平らな面に塗る

Take the clear file off, and put resin on the flat surface.

同じパーツを貼り合わせる。

Put same two pieces together.

照射

Cure.

バリをやすりで削る。

Sand the burr.

ストローを2~3mmにカットする。

Cut the straw into 2〜3mm.

カットしたストローをマットの上に置きレジンを入れる。
その横でシリコンマットに直接レジンを円になるようにのせる。
(型紙の円を下においておくとわかりやすい)

Put the straw on the silicone mat, and put resin in.
Also put make a resin circle next to it.
(put a circle pattern paper under the silicone mat)

照射

Cure.

ストローからレジンを取り出す。

Take the resin part out of the straw.

ストローで作った円柱にレジンをつけ円にのせる。

Attach the resin part to the resin circle with clear resin.

照射。

Cure.

ツイスト丸カンをシリコンマットに置き、中にレジンを入れる。
Tピンを丸カンの中心に立てて照射。

上からさらにレジンを盛り上がるようにのせ照射。

Put more resin on and cure.


Tピンの先を平ペンチで折り曲げ、ニッパーで4mm程度にカット。
折り曲げた先の部分をまるやっとこで丸める。

Bend a head pin with a flat nose plier, and cut with a nipper at 4mm from where it bent.
Curl the head pin with a corn plier.


円柱の上にレジンを塗る。

Put clear resin on top of the cylinder.

ガラスドームを円柱の上に乗せ照射。

Attach a glass dome on top and cure.

取っ手をレジンで接着、照射。

Attach a handle with resin and cure.

注ぎ口もレジンで接着、照射。

Attach the spout with resin and cure.

付けたパーツをレジンでコーティング。

Put clear resin around the handle and the spout.

照射

Cure.

ガラスドーム内にビーズを入れる。

Put some beads into the glass dome.

ラメも入れる。

Put some glitter in.

ベビーオイルを入れる。

Then put some baby oil into the glass dome.


★オイルがガラスドームに付いた場合は、アルコールなどで綺麗に拭き取って下さい。

★Wipe off the baby oil around the mouth of the glass dome with alchol.

蓋にレジンを塗って、ガラスドームの上に乗せる。

Put resin on the top of the pot, and put it on the pot.

照射

Cure.

出来上がったポットに丸カンを付けチェーンを通す。
チェーンの先に丸カンとカニカンを付ける。

Attach a jump ring to the eye pin and put a chain through the jump ring.
Attach a jump ring and a lobster claps to the chain.

着用イメージ。

Done!

【動画で見る】

同じカテゴリーの記事