レシピ

レシピ

あっちへこっちへ

浮遊クラゲネックレス Mystical Jellyfish Necklace

暑くなってくると自然と涼しげなものを求めてしまいます☆
クリアな素材、氷みたいにシャリシャリ感のある質感など、、
今回はちょっと珍しく、透け感にゆらぁっと流されるような脱力感につい暑さを
忘れさせてくれそうなクラゲです♡
レジンの層ごとに触手を描くことによって立体感が生まれます♪

【材料】
①UV-LEDレジン ハード 5g
②UVレジン用着色剤 少々 (シアン、ブルー、ホワイト)
④チェーン 20cm 2本
⑤カニカン 1個
⑥アジャスター 1本
⑨丸カン 大小

【MATERIALS】
①UV-LED resin hard: 5g
②Resin coloring agent: cyan, blue, white
④Chain: 20cm×2
⑤Lobster claps: 1
⑥Extender chain :1
⑨Jump ring: M/L

【道具】
①UV-LEDライト
②調色スティック
③調色パレット
④平ペンチ
⑤シリコンマット
⑥ピンバイス
⑦ピンセット
⑧カッターマット
⑨筆
⑩シリコンモールド(半球型、卵型) 

【TOOLS】
①UV-LED light
②Mixing stick
③Mixing pallet
④Flatnose plier
⑤Silicon mat
⑥Pin vise
⑦Tweezers
⑧Cutting mat
⑨Brush
⑩Silicone mold (hemisphere,egg shape)

コツ・ポイント
◎この作品は気泡が入るように製作しております。クラゲに掛かる場合は気泡の位置を調節して照射して下さい
◎クラゲの頭部分の白レジンは薄めに作ると中の青レジンが綺麗に透けます
◎タマゴ型モールドからクラゲの頭がはみ出た場合はヤスリ等で削って下さい
◎レジンを使用する際は手袋、マスクなどを着用して下さい
◎レジンを使用する際は風通しの良い、換気のできる場所で作業をして下さい
◎レジンは必ず固まったのを確認して重ねてください
◎レジンが肌についた際はすぐによく洗い流してください

半球モールドにホワイトレジンを入れる。

Pour white resin into a hemisphere mold.

ホワイトレジンの中心にシアンレジンを1~2滴垂らす。

Put 1〜2 drips of cyan resin into the middle of white resin.

照射

Cure.

半球の回りに白レジンをのせる。

Put white resin around the hemisphere.

照射

Cure.

モールドから半球を取出し、ふちに白レジンを塗る

Take it out of the mold.
Put white resin around the edge.

照射

Cure.

上からクラゲの模様を白レジンで描く。

Draw a Jellyfish pattern on the hemisphere with white resin.

照射

Cure.

卵型モールドにクリアレジンを3分の1入れる。
クラゲの頭部分が少し浸るようにピンセットで入れ、持ったまま照射。

Pour clear resin into 1/3 of the egg shape mold.
Put the jelly fish part into the clear resin. Hold and cure.

一層目のクリアレジンの上にクラゲの足を白レジンで描く。

Draw arms of jelly fish with white resin.

照射。

Cure.

上からクリアレジンを1、2mmの厚みでいれる。

Put clear resin for about 2〜3mm thickness.

照射

Cure.

一層目に描いた上に被らないように足を描き足す。

Draw more oral arms on.

照射

Cure.

上からさらにレジンを2〜3mmの厚さで入れる。

Put clear resin for about 2〜3mm thickness again.

照射

Cure.

さらにくらげの足を描き足す。

Draw more arms.

照射

Cure.

モールドの上までレジンを入れる。

Put resin into the top of the mold.

照射。

Cure.

★層を分けることで遠近感を出すことが出来ます。
★Use layers to make a depth.

モールドから取り出し、マスキングテープの上に乗せて固定する。
パーツの下3分の1部分にクリアレジンをのせる。

Take it out from the mold, and put it on a masking tape.
Put clear resin to 1/3 of the resin part.

次に薄めのブルーを3分の2くらいまで塗る。

Put light blue resin to 2/3 of the resin part.

残りの部分に濃いめのブルーをのせグラデーションになるようにそれぞれの境目を少し混ぜる。

Put blue resin on the rest, and mix the borders.

照射。

Cure.

クリアレジンで表面をコーティングする。

Coat the surface with clear resin.

照射。

Cure.

ピンバイスでトップに穴をあける。

Make a hole on the top with pin vise.

穴にレジンを塗り、ヒートンを刺して照射。
ヒートンに丸カンを付ける。

Put resin at the hole, and stick an eye bolt. Cure.
Attach a jump ring to the eye bolt.

丸カンにチェーンを通し、両端にカニカン、丸カンをCカンで付ける。

Put a chain through the jump ring.
Attach a lobster claps and a jump ring on the both ends of the chain.

着用イメージ。

Done!

【動画で見る】

同じカテゴリーの記事